Use the drone jammer countermeasure system to control the "black flight"
The drone jammer countermeasure system mainly reduces some illegal infiltration or threats to facility activities. The rapid development of drone technology, its simple operability and universal availability are widely used in daily life, making some unmanned drones illegally infiltrate into the protected area, for example: using drones to transport dangerous Objects to the site, or infiltrating into the defense area to monitor information, etc., these series of problems can be realized by controlling the drone through the remote function, so we must pay attention to the usual precautions.
Most amateur drones are equipped with high-definition cameras, which can record images and sounds in real time, which has caused great trouble to prisons, gas stations, industrial areas or the daily privacy of residents. The drone jammer countermeasure system suppresses the video transmission signal of the camera inside the drone equipment and the GPS signal from the satellite through the control signal, so as to realize the active protection of the drone that caused the accident. When the "Black Fly" UAV enters the protected area, the uav jammer countermeasure system will cause the image data captured by the UAV to be lost, and the control and positioning signals will be lost, preventing the UAV from further entering the protected area , can only be forced to drive away or land. By using different methods to deal with different "black flying" targets, and the drone jammer countermeasure system interferes with the signal frequency band used by drones, in the method of combating the "black flying" phenomenon, the risk of people and property will be reduced drop to lowest.
@topsignaljammer Full Band WiFi Jammer 2.4GHZ5.2GHZ5.8GHZ U Disk
♬ original sound - topsignaljammer
The drone jammer system you purchased is composed of accessories. These accessories include the host, directional plate antenna, outer box, and AC power cord. This section briefly describes the main accessory functions.
◎ The fan works after the device is powered on
◎ The GPS switch is turned on, and the power light is on; after the drone flies into the jurisdiction, it cannot locate and return. At this time, the pilot of the drone will display that the GPS signal is lost and cannot be located. Pilots can also operate remote-controlled drone aircraft.
◎ The 5.8G and 5.1G switches are turned on, and the power light is on; after the UAV flies into the jurisdiction, it will interfere with the UAV remote control or video transmission, causing the UAV remote control or video transmission to lose the signal. (When the GPS switch is not turned on, the drone will automatically return to the home and return to the take-off positioning point)
◎ The 2.4G switch is turned on, and the power light is on; after the UAV flies into the jurisdiction, it will interfere with the UAV remote control or video transmission, causing the UAV remote control or video transmission to lose signal. (When the GPS switch is not turned on, the drone will automatically return to the home and return to the take-off positioning point)
◎ When all the switches are turned on, the fixed UAV shields the countermeasure system. After the UAV flies into the jurisdiction, the UAV will hover at low altitude for about 6 seconds, and then drop vertically at low altitude on the spot, reaching the level of no one. The drone was shot down, and the remote control of the drone pilot could not be controlled at this time.
Sample Image Gallery
