Precautions for installing high-power drone jammers on poles
After customers choose and purchase our company's high-power drone signal jammers, they will maximize the jamming effect against drones by adopting correct and standardized installation equipment. So, what precautions should be taken when installing this high-power drone jammer?
First of all, the preferred location for installing drone jammers is the roof of some tall buildings. When installing in this environment, you only need to erect the main unit of the drone jammer on the ground on the roof and erect the transmitting antenna with a simple bracket.
Secondly, if there is no building of suitable height to use, you can only use the pole (street light pole) method. The main unit and antenna of the drone jammer need to be installed on the upper end of the street light pole. This installation method looks simple, but the construction process is still relatively difficult. The street light pole must have a solid foundation. When fixing the main unit and antenna of the drone jammer to the top of the street light pole, it must be strong and stable! During the construction process, it is even necessary to use the help of a crane.
Whether the UAV signal jammer for cell phone is installed on the roof of a building or on the top of a street light pole, lightning protection measures must be taken at the same time. The usual practice is to add a lightning rod (lightning rod) near the antenna, and the height of the lightning rod must be at least 1-3 meters higher than the antenna. The lightning rod is connected to the ground through a metal wire. It must also be noted here that the lightning rod and the metal wire must be insulated from the UAV jammer.
Signal Blocker Image Gallery
