How to take waterproof and lightning protection measures when installing fixed drone jammers outdoors?
Some important government agencies or military secret units usually install high-power fixed drone signal jammers outdoors after selecting and purchasing them. Then the key issue to consider during the installation process is: How to take waterproof and lightning protection measures when installing fixed drone jammers outdoors?
There are usually two ways to install outdoors: the first is to use the height of the building and choose to install it on the roof of the building. This method is more time-saving and labor-saving, and the installation difficulty is relatively low. Just find a suitable fixed position on the roof to fix the host of the drone jammer. The host of the system itself has waterproof performance. After the antenna is fixed and installed, the antenna and the RF port of the host are connected by an RF cable. At this time, it is necessary to focus on the waterproof protection of the RF connection port. It is recommended to use waterproof tape or sealant for waterproofing. When the entire set of drone jammers is installed on the roof of the building, the original lightning protection facilities of the building can be used for effective lightning protection. It should be noted that the height of the antenna cannot exceed the height of the lightning rod of the building.
The second outdoor installation method is to install the UAV jammer on a street light pole or iron tower. The construction difficulty of this installation method is relatively high, and special attention should be paid to waterproofing and lightning protection during the installation process. The more standardized installation method we recommend is: the antenna is installed in the middle and upper part of the street light pole, and the antenna and RF cable are installed in a customized fiberglass antenna cover, which can have very effective waterproof performance. The host of the UAV jammer can be installed at the lower end of the fiberglass antenna cover, and pay attention to the waterproof protection of the RF port and power supply interface.
For the above two outdoor installation methods of UAV signal jammers for moblie phone, customers can choose according to the actual environment of their units. Generally, if there are ready-made buildings available, the rooftop installation method is preferred. When there are no buildings of suitable height available, only the pole installation method can be selected.
Signal Blocker Image Gallery
