How to install drone jammers on the roof of a building?
After purchasing a high-power drone signal blockers for sale, customers will face the problem of how to install and debug it. The first thing to solve is how to choose the installation location. We recommend two installation locations or installation methods. One is to use the height of the building and install it directly on the roof of the building. The second is to erect a separate installation pole and install the drone jammer on the top of the pole. Of these two recommended methods, the first option is the first one, because if the equipment is installed on the roof of the building, the construction difficulty and the installation cost will be greatly reduced. So, in the implementation of a specific project, how to install the drone jammer on the roof of a building?
It is critical to choose the roof of a building for installation. The reasonable project is to choose the building with the highest floor on site and use its roof to install the drone jammer. In this way, the anti-drone interference signal can be prevented from being blocked by other buildings during transmission to the surrounding areas.
When installing a drone jammer on the roof, it is necessary to ensure that the host of the device has a waterproof function. At the same time, when each transmitting antenna, feeder, and power cable are connected to the host, each connection port must be waterproof or insulated. If conditions permit, it is recommended to add an antenna protection cover to the antenna.
Since the height of the drone signal jammer for wifi will inevitably be higher than the height of the top of the building after installation, it is necessary to consider adding lightning protection measures to the drone jammer. Two of the most important points are: the first is the height of the lightning rod, which must be at least 1-2 meters higher than the highest point of the antenna. The second point is that the lightning rod must be connected to the ground wire, and the ground wire must be insulated from all components of the entire system.
Finally, it is also important to consider: since the drone jammer is installed at a higher position on the roof, the main air wind is strong, so the main unit of the equipment must be fixed reliably, and the equipment bracket, pole, etc. must be firmly fixed on the roof of the building. If conditions permit, it is recommended to add a cable to ensure the stability of the pole.
Signal Blocker Image Gallery
