A unique device commonly referred to as a GPS jammer (suppressor or GPS blocker) that has recently emerged in the field of electronic navigation is a portable gps jammer device whose task is to avoid tracking by using GPS to identify all users at the exact location. This article will provide you with the opportunity to inquire about short GPS jammers. The GPS signal jamming system software is designed to suppress the signals of the World Satellite Navigation System GPS system in the 1500-1600MHz range. Detect the location of the car and all cars based on GPS, and APS shielding mechanical equipment will not interfere with mechanical equipment such as mobile phones and GNS jammers. Since trackers are commonly installed in cars, trucks, and buses, they are often installed in the vehicle cab.
After connecting through the car's cigarette lighter, the device immediately starts working and generates wireless noise (interference) in the range of 1500-1600MHz (l1/L2) within a radius of 15 meters. This is a basic frequency band, and they are all suitable for GPS equipment, including trackers that can track all coordinates. When the navigation callback function is turned on, all GPS can be used to identify your location, terminate reception, and fade from the monitor display.
More and more people are dealing with illegal GPS tracking on a regular basis. Therefore, a GPS signal suppressor (dryer) can help you avoid GPS tracking signals effectively. The aps jammer can be powered by the on-board cigarette lighter in the car. It is a very convenient and compact device that can block GPS signals. The basic working principle of the anti-aps system is to interfere with the transmission frequency of effective signals. The greater the intensity of the output power noise generator, the smaller the probability of access frequency, and the greater the harmful radius of interference.
There are three categories of GPS scramblers:
1. GPS jammer, which blocks communication satellite signals (in turn, it causes noise in the communication satellite frequencies). The signal is always transmitted at two key frequencies to timely interfere with equipment on the road (or in the sky); the GPS frequency (civilian L1 frequency band used for dry trackers) is 1575.42MHz. Frequency GLONASS (civilian L1 frequency band, used as a tracker); 1602MHz. Because the dry frequencies are so close, they are blocked by broadband network noisemakers, requiring only a wireless antenna.
2) GSM jammer, which causes interference on the frequency of communication operators. Operators operate at different frequencies, depending on the mode of operation (3G, 4G) and standard (GSM, DAMPS, CDMA). Therefore, several antennas are installed on the positive insulation to turn off the entire area, and these antennas work separately.
3) Universal jammer. It can be used in all frequency bands, such as communication operator and communication satellite signals, and it has multiple wireless antennas to cause interference in a selected area. It also often gives the possibility of selective operation, that is, the ability to generate noise only on selected frequencies (such as is the case only with the cellular communication module GSM1800).
It’s important to note that using a GPS signal jammer is legal if you use it for your own safety and privacy, but if you take away a third party’s ability to use various GPS signals, you are breaking the law. regulations. If you still don't know how to interfere with the GPS signal, please leave a message online at any time and we will help you get more information and choose the good project you want.