How to achieve concealed installation of conference room frequency jammers so that they are not easily noticed?
Many customers who need to install conference room frequency signal blockers mentioned that one of their biggest concerns is: how to install the conference room frequency jammer more concealed? So that the participants will not easily find that the signal jammer is installed in the conference room after entering the venue.
There are still many ways to achieve this goal. Based on the installation experience accumulated by several customers in the past, we summarize and summarize the following commonly used methods for concealed installation of conference room frequency jammers:
1. Install the jammer in the ceiling at the top of the conference room (usually the ceiling is required to be in the form of a movable gusset plate and cannot be made of metal);
2. If the walls around the conference room are reserved with dark boxes and dark boxes for equipment cabinets in advance, and the interior has certain ventilation performance, then the frequency jammer can also be installed in these dark boxes;
3. The lockers in the equipment room or corners can also be used as concealed installation locations for conference room frequency jammers. It is also necessary to pay attention to the ventilation conditions in these areas, and there must be no metal plates, because this will affect the signal transmission of the jammer.
4. Some conference rooms have wooden speakers hanging on both sides. Select some of them and remove the internal audio components for hidden installation of frequency jammers.
5. If there is a large conference table or podium, speech desk or other wooden cavities, empty cabinets, etc., they can also be used to install mobile phone jammers.
In fact, according to the decoration style and decoration materials of different conference rooms, there should be many suitable locations for installing frequency jammers, but in summary, there are several points that need to be considered:
1. The interference equipment needs power supply. When arranging the power supply line, the rationality and safety of the power supply line need to be considered;
2. The frequency jammer will emit considerable heat when working for a long time. Therefore, it must not be installed in a small closed space. Make sure that the installation location has good ventilation;
3. Objects and plates used to conceal or block the interference equipment cannot be metal mesh structures or metal plates, because this will greatly attenuate the signal transmission;
4. The existing wireless microphones, wireless speakers, etc. in the conference room will be interfered to a certain extent if they are very close to the frequency jammer. It is recommended to keep a safe distance of more than 2 meters between the two.