Mobile phone signal jammers play a certain role in jamming and shielding signals, and can automatically identify the frequency of the signal during use. In order to avoid partial signal failure, after a period of application, the mobile phone signal jammer must be maintained regularly. This will help to extend the service life of the equipment. So how to properly maintain the mobile phone signal jammer?
How to properly maintain the cell phone jammer?
1. Keep away from water when cleaning the equipment
During the cleaning process, the equipment should not be exposed to water, otherwise it is very likely that excess liquid will be mixed into the shield and then come into contact with the internal hardware of the equipment. Moreover, some chemical cleaning products may also cause corrosion and damage to the protective layer on the panel. Therefore, it is necessary to prevent the application of cleaning products containing ammonia or alcohol.
2. Use appropriate cleaning tools
A dry microfiber cloth can be used to wipe the cell phone signal shielding device, which can easily remove dust and dirt impurities. There are not too many requirements for the wiping direction. You can also use high-quality microfiber cloth. If the device remains stained, you can moisten the cloth with water and wring it out until the cloth is almost dry, then slowly wipe from the top to the bottom of the jammer. For stubborn spots, pour a small amount of non-ammonia and alcohol-free cleaning products on the microfiber cloth, and then wipe the cell phone signal shielding device. Water and vinegar solutions can also be sprayed.
When maintaining the mobile phone signal jammer, you need to clean it in time, choose the appropriate cleaning agent, and do not use water, otherwise it will cause a short circuit. Be sure to turn off the switch when not using the mobile phone signal jammer, otherwise many signals will be incorrectly shielded. Save it well for the next application.