After the wireless wifi jammer is turned on and working, the effective coverage area of the shielded signal is usually between tens of square meters and hundreds of square meters. However, due to the influence of communication base stations near the usage scene or other factors, the shielding range of the jammer may not be able to achieve the desired effect. At this time, the user hopes to use some methods to expand the coverage of the shielding signal, so that the shielding effect of the mobile phone shielding device can be greatly improved. So, is there any way to improve the shielding effect of the wireless jammer?
First of all, you need to know whether the interference device is a qualified product of a regular manufacturer, and then analyze the installation method and surrounding environment of the wireless jammer. Is the mobile phone shielding device mounted on the wall or placed on the table? Is the installation height too high? The general installation height is about 1.8-2.5 meters. If it is placed directly on the ground, it may cause serious signal attenuation due to too many obstacles in the signal transmission path, thus affecting the shielding effect. In addition to these factors, and observing the distribution of surrounding base stations, it is recommended that the installation location of the wireless WiFi device be selected on the transmission path from the base station to the shielded area, usually near the window of the room.
However, if you want the wireless jammer device to cover a larger area, the simplest and most direct way is to use a wireless jammer with higher power.
What are the precautions for installing a jammer?
The jammer is a new type of information security product, which uses specific electromagnetic signals to form a shielding network where protection is required, so that the mobile phone cannot receive data from the base station, making it impossible to establish contact with the base station. When we install the wireless signal jammer, we should understand the following precautions:
1. Equipment Installation Guide
① Before installing the equipment, you must first understand the orientation of the base station, and try to make the direction of the wireless signal jammer consistent with the direction of the base station.
②When installing the equipment, make sure that there are no metal objects around the machine to prevent signal reflection from affecting the shielding effect.
③If the device is installed indoors, pay attention to whether there are wireless devices in the room and whether its transmission frequency will cause co-channel interference.
④ If there is a signal booster amplifier installed indoors, then this area is not suitable for installation.
2. Will the wireless signal jammer have radiation? Is it harmful to the human body?
As for whether there is radiation, everyone knows that as long as it is an electronic product, there will be some radiation. Any electrical equipment will have radiation. Just like the mobile phones we use, they are often close to our bodies. The country has also set a standard for mobile phone radiation. The radiation produced by wireless signal jammers is far below the national standard and can be ignored, so there is almost no damage to the human body.