In order to ensure the confidentiality of the meeting content, purify the meeting order, and maintain the normal and orderly progress of the meeting room process. Recently, a customer inquired about the mobile phone signal jammer in the conference room. The length of the conference room is 14 meters and the width is 25 meters. Several mobile phone wifi jammer are needed, and how to arrange the mobile phone signal jammers.
First, judge the environment of the conference room and the distribution of surrounding base stations, and inform that there are no base stations around and that there is no indoor signal distribution system installed inside the building. In this way, the signal strength of the mobile phone in the conference room belongs to the normal environment, and the jammer can be equipped according to the normal situation. The area of the conference room is 14✖25=350 square meters. The area needs to be estimated by 3-4 isolators. In order to achieve full coverage of the conference room, it is recommended to equip 4 isolators.
Next how to lay out these 4 jammers. The following is the estimated point map of the mobile phone signal jammer in the conference room.
It can be seen that there are two mobile phone signal jammers in the conference room. This is because it is not suitable to place jammers at the rostrum, so the jammers are placed at the corners, and the other one is placed at the opposite corners. The other two are supplementary blind spots and are intentionally placed on the vertical line of the diagonal center. In this way, the blind areas of the two diagonal shields can be effectively supplemented.