When installing a signal jammer, you need to pay attention to these 8 points.
We use equipment such as signal jammers in many places. Do you know what issues you need to pay attention to when using signal jammers?
1. Be sure to install the wireless antenna according to the corresponding mark on the server first, and then connect it to the power supply of the chassis.
2. The effective coverage area of the jammer is an annular area with the jammer as the center. Therefore, when using it, pay attention to properly selecting the placement position of the electronic jammer to avoid shielding blind spots; if it is a directional antenna, it can be based on the antenna standard sector shape The viewing angle adjusts the aiming direction.
3. The shield should be placed in a well-ventilated place, away from large and medium-sized objects as much as possible, and away from strong electromagnetic induction sources of strong heat sources, to ensure the shielding effect and long-term stable operation.
4. When the shield is working, do not pile other objects on it or disassemble or disassemble the antenna, so as not to affect the shielding effect and damage the equipment.
5. When the signal jammer for cell phone is not in use, the power supply should be disconnected immediately to avoid affecting the normal use of the mobile phone.
6. When using the shield outdoors, pay attention to dust and moisture. Please avoid corrosive gases and liquids, and do a good job of anti-fouling and waterproofing to avoid accelerating the aging of the external electronic components of the equipment.
7. When the site facilities used exceed the reasonable shielding range, it is recommended to use several shielders and multi-tube installation to ensure the shielding effect.
8. Since the power supply and antenna are specially designed for the server supporting facilities and are adjusted one by one at the factory, please try not to exchange them to ensure the best effect.
Sample Image Gallery
