The UAV detection and countermeasure system (or UAV monitoring, early warning and prevention and control system) is to measure the incoming wave direction of the UAV image transmission signal and the incoming wave direction of the remote control signal in real time, so as to realize the detection of the invading unknown UAV and the remote control signal. Remote control detection. When the drone or remote control enters the area, an alarm is issued and the operator is warned, and the operator can choose to jam the equipment to make a forced landing or force the drone away.
The UAV detection and countermeasure system does not limit the detection range. Usually, its detection range is equivalent to the available distance between the UAV and the remote control, which generally depends on the transmission power of the UAV/remote control. A single device can It can detect a range of more than 10 kilometers alone; if multiple devices are set up for networking, the coverage can be expanded infinitely.
Compared with the current similar products, it has the characteristics of small size, light weight, low power consumption, and multi-functions such as direction finding, monitoring and suppression, which can meet a variety of uses and realize a variety of tactics. The system operating software has comprehensive functions, friendly interface, simple operation and convenient use. At the same time, the drone jammer detection and countermeasure system can be further optimized and improved according to the needs of field operations and actual combat.
Detection system combat technical indicators
1. Monitoring frequency range
2.4GHz～6GHz, can be extended to full coverage from 30MHz to 6GHz as needed. (the most complete domestic frequency)
2. Direction finding distance (different antenna front-end and processing chips can be customized according to requirements
2.4GHz UAV direction finding distance: ≥2000 meters, ≥5000 meters, ≥10000 meters (three optional)
5.8GHz UAV direction finding distance: ≥2000 meters, ≥5000 meters, ≥10000 meters (three optional).
3. Direction finding accuracy (standard signal source)
Under the condition of detection distance ≥2000 meters, ≤1.5°(RMS);
Under the condition of detection distance ≥5000 meters, ≤2°(RMS);
Under the condition of detection distance ≥10000 meters, ≤3°(RMS).
4. Mobility
Single-person operation, equipment opening/disconnection time is not more than 5min.
5. Power supply and power consumption
DC 24V power supply, can be connected to an external AC adapter; battery continuous power supply is not less than 4h; total power consumption is not more than 100W.
6. Equipment weight
When the detection distance is ≥2000 meters, the whole set of equipment is ≤15kg;
Under the condition of detection distance ≥5000 meters, the whole set of equipment ≤35kg;
When the detection distance is ≥10000 meters, the whole set of equipment is ≤65kg.