In private areas such as airports, prisons, the military, detention centers, gas stations, government departments, and private residential quarters, a drone suddenly appeared. Most of the staff will be at a loss what to do? At this time, if you use a drone jammer, you can easily deal with the "black flight" of the drone.
The UAV jammer uses the method of jamming and blocking the signal used by the UAV's flight control system to achieve automatic return or landing without damaging or destroying the UAV. drone jammer mainly use the 5.8GHz, 2.4GHz interference frequency bands, and the 1.5GHz frequency band frequently used by drones. By shielding or jamming these frequency bands, the drones cannot receive the signals emitted by the operator, forcing The drone lands or returns to avoid drone "black flying" accidents in important buildings.
Due to the emergence of drone jammers, and the stable effect is favored by customers, various advantages: small size, easy to carry, wide range, simple operation and so on. It has a wide range of applications, such as some important areas that require drone jammers to ensure the safety of low-altitude areas. The functions of drones can be selected according to different usage requirements. Of course, multiple combinations can also be used at the same time. , so that the important protection of privacy places will be more comprehensive.
◎ The 4 N-type interfaces (2.4G/1.5G/1.5G/5.8G) used to connect the directional plate antennas correspond to the 4 N-type interfaces at the bottom of the equipment using 50-7 special feeder connections, for connector tightening, waterproof tape Wrap it up.
◎ One power mains aviation interface (AC220 IN)
The drone jammer system you purchased is composed of accessories. These accessories include the host, directional plate antenna, outer box, and AC power cord. This section briefly describes the main accessory functions.
@topsignaljammer World First 22 Antennas Wireless Signal Jammer WIFI Jammers
♬ original sound - topsignaljammer
◎ The fan works after the device is powered on
◎ The GPS switch is turned on, and the power light is on; after the drone flies into the jurisdiction, it cannot locate and return. At this time, the pilot of the drone will display that the GPS signal is lost and cannot be located. Pilots can also operate remote-controlled drone aircraft.
◎ The 5.8G and 5.1G switches are turned on, and the power light is on; after the UAV flies into the jurisdiction, it will interfere with the UAV remote control or video transmission, causing the UAV remote control or video transmission to lose the signal. (When the GPS switch is not turned on, the drone will automatically return to the home and return to the take-off positioning point)
◎ The 2.4G switch is turned on, and the power light is on; after the UAV flies into the jurisdiction, it will interfere with the UAV remote control or video transmission, causing the UAV remote control or video transmission to lose signal. (When the GPS switch is not turned on, the drone will automatically return to the home and return to the take-off positioning point)
◎ When all switches are turned on, after the UAV flies into the jurisdiction, the UAV will hover in the low altitude for about 6 seconds, and then it will land vertically at low altitude on the spot, and the UAV will be shot down. At this time, the UAV pilot will The remote control cannot be controlled.