Some important government agencies or military secret units, after selecting and purchasing high-power fixed anti-drone cell phone signal blockers, usually install them outdoors. Then there are key issues that need to be considered during the installation process: How to ensure waterproofing and lightning protection during outdoor installation? There are usually two methods for outdoor installation: the first is to use the height of the building and choose to install on the roof of the building. This method saves time and effort, and the installation difficulty is relatively low.
Just find a suitable fixed position on the roof of the building and fix the main unit of the anti-drone cell phone signal jammer. The host of the system itself is waterproof. After the antenna is fixedly installed, the antenna is connected to the RF port of the host through an RF cable. At this time, you need to focus on waterproofing the RF connection port. It is recommended to use waterproof tape or sealant for waterproofing. When the complete set of UAV cell phone signal jammer is installed on the roof of a building, the original lightning protection facilities of the building can be used for effective lightning protection. Special attention should be paid to that the height of the antenna cannot exceed the height of the building's lightning rod.
The second type of outdoor installation is to install the counter-drone cell phone signal jammer on a street light pole or tower. The construction difficulty of using this installation method is relatively high, and special attention must be paid to waterproofing and lightning protection during the installation process. The more standardized installation method we recommend is: the antenna is installed on the middle and upper part of the street light pole, and the antenna and RF cable are installed in a customized fiberglass radome, which can have very effective waterproof performance. The host of the anti-drone cell phone signal jammer can be installed at the lower end of the fiberglass radome. At the same time, pay attention to the waterproof protection of the radio frequency port and power supply interface.
For the above two outdoor installation methods of anti-drone signal jammers for sale, customers can choose according to the actual environment of the unit. Generally, if there is a ready-made building that can be used, the rooftop installation method is preferred. When there is no building of suitable height available, the only option is pole installation.