When customers purchase a mobile phone signal shielding device, they often have completed the overall decoration and decoration work in the conference room, only to think of the need to shield the mobile phone signal in the conference room. Once the decoration is over, it is not difficult to choose a mobile phone signal shielding device, but how to install it becomes a difficult problem. The first problem to be considered is that the installation of the mobile phone signal shielding device will affect the overall appearance of the conference room.
The problem that the installation of a mobile phone signal jammer in the conference room affects the aesthetics not only exists when a new shielding device is purchased, but even some old mobile phone signal shielding devices that have been installed in the past and need to be upgraded to a 5G shielding device will also face the problem. Upgrading the iterative 5G shielding device has the problem that the original installation position is not sufficient due to the larger appearance and more antennas.
If there is no pre-installed hidden compartment (wall-embedded cassette) reserved for the 5G shielding device in the conference room, usually the best suggestion is to use some wall passages or free positions in the corner of the conference room to create a side cabinet. The material selection and color matching should be consistent with the overall decoration style of the conference room. This side cabinet can be specially used to install a mobile phone signal shielding device.
In the actual construction process, the side cabinet used to install the 5G shielding device needs to reserve the threading hole for the power input, and at the same time reserve a certain air inlet and outlet on the side or the back of the side cabinet, so as to facilitate the normal operation of the mobile phone signal shielding device. cooling ventilation.
As shown in the picture, the customer made good use of the environment of the conference room and created a special installation side cabinet for the mobile phone signal shielding device that is very suitable for the conference room environment. The internal space of this side cabinet is also large enough , which is installed in our company's SMa-818K80 medium-power 5G shielding device, and also has a special mounting bracket for the high-gain omnidirectional antenna of the shielding device.